Telecnatron Forum

Discuss and comment on articles and related topics.

Welcome! [Log In] [Register]
USB To RS232 Serial Adapter Dongle
November 06, 2020 01:15PM
USB To RS232 Serial Adapter Dongle

Using ⅛" stereo plugs, sockets and cables is a convenient way of connection RS232 serial lines between PCs and micro-controllers. Here is a simple little dongle incorporating a USB-to TTL-serial module, a max2323 and an ⅛" stereo jack. TX and RX lines are configurable via jumpers.
Re: USB To RS232 Serial Adapter Dongle
May 27, 2024 06:35PM
Identify Components: You will need a USB to UART converter chip (such as the popular CP2102 or FT232RL), female RS232 connector, capacitors, resistors, and a USB connector.

Design the Circuit: Create a schematic diagram of the circuit, showing how the USB to UART converter chip connects to the RS232 connector. Include any necessary components like capacitors for stability and voltage regulation.

Your Email:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.